Pages

Sunday, July 28, 2013

Netgear WNA 1100 Drivers for Windows 8

Netgear WNA 1100 Drivers for Windows 8


Click here to download (Link 1 /  Link 2)Netgear WNA 1100 Windows 8 Supported Drivers. If there is any Problem mail me @ aks2103@gmail.com ...



Plz Seed also if you Download the Torrent !


Thursday, July 25, 2013

How To Run and Install Windows Phone 8 On an Android Phone



Step 1.

Download the app called “Launcher 8″.
Screenshot_2013-04-12-21-30-37

Step 2.

Install this app on your android device.
Step 3.

Make it the default launcher for android
Screenshot_2013-04-12-21-07-38

for further help Check dis Video http://www.youtube.com/watch?v=pCprmejrmTg 
If there exist any Such Post of jail breaking boot loader for Windows .. We Will Let u know !!




How to Install Android 4.2.2 Jelly Bean on your PC


Download:

1.Oracle VM VirtualBox - Download the latest version of here
2.Android x86 4.2 Image - Download the Android 4.2 image from here

Instructions:

1.Install VirtualBox on your PC
2.Open VirtualBox and select New. In the dialog box enter the name as your wish and select
               i)Type : Linux
               ii)Version : Other Linux
and select Next
3.In the next dialog box enter the memory size as your wish
Note : Minimum 512Mb required for JellyBean
and select Next
4.In the next dialog box select create a virtual hard drive now. Then select VDI and select fixed or dynamically allocated as your wish and create the virtual drive
Note : Mininimum 1 GB required for installation
5.Select Virtual device and select settings, a dialog box appears. In the dialog box select
               i)Storage->Storage Tree->Empty
               ii)In the attributes section select the Android 4.2 iso file you downloaded and check Live Cd/Dvd, then click Ok

Here's how to install Android 4.2.2 Jelly Bean on your PC

6.Then start the virtual device. In the screen select Install Android-x86 to hard disk.

Here's how to install Android 4.2.2 Jelly Bean on your PC

7.In the next screen select Create/Modify Partition.

Here's how to install Android 4.2.2 Jelly Bean on your PC

8.Then create a new primary bootable partition and select write. After finishing writing select quit.

Here's how to install Android 4.2.2 Jelly Bean on your PC

9.Then install android in sda1 and select type as ext3 , choose yes for installing grub.
10.After installing remove live iso from VirtualBox and reboot. Now you can boot into Android 4.2.2.






Sunday, July 7, 2013

To Install Windows 7 from USB


Installation

To install the Windows 7 USB/DVD Download tool:
  1. Click to open the Windows 7 USB/DVD Download tool installation file.
  2. When you are prompted to either save the file to disk or run it, choose Run.
  3. Follow the steps in the setup dialogs. You'll have the option to specify where to install the Windows 7 USB/DVD Download Tool.




NOTE: You need to be an administrator on the computer you are installing the Windows 7 USB/DVD Download tool on. The tool requires the Microsoft .NET Framework version 2.0 or higher.
System requirements
  • Windows XP SP2, Windows Vista, or Windows 7 (32-bit or 64-bit)
  • Pentium 233-megahertz (MHz) processor or faster (300 MHz is recommended)
  • 50MB of free space on your hard drive
  • DVD-R drive or 4GB removable USB flash drive
For Windows XP users
The following applications must be installed prior to installing the tool:
  • Microsoft .NET Framework 2.0 must be installed. It can be downloaded here.
  • Microsoft Image Mastering API v2 must be installed. It can be downloaded here.

Using the Windows 7 USB/DVD download tool

Before you run the Windows 7 USB/DVD Download Tool, make sure you have already purchased the Windows 7 ISO download from Microsoft Store and have downloaded the Windows 7 ISO file to your hard drive. If you have purchased Windows 7 but have not yet downloaded the ISO file, you can download the file from your Microsoft Store Account.
To make a copy of your Windows 7 ISO file:
  1. Click the Windows START button, and click WINDOWS 7 USB/DVD DOWNLOAD TOOL in the ALL PROGRAMS list to open the Windows 7 USB/DVD Download Tool.


  2. In the SOURCE FILE box, type the name and path of your Windows 7 ISO file, or click BROWSE and select the file from the OPEN dialog box. Click NEXT.

  3. Select USB DEVICE to create a copy on a USB flash drive or select DVD disk to create a copy on a DVD disk.

  4. If you are copying the file to a USB flash drive, select your USB device in the drop-down list and click BEGIN COPYING. If you are copying the file up to a DVD, click BEGIN BURNING.

When your Windows 7 ISO file is copied onto your chosen media, install Windows 7 by moving to the root folder of your DVD or USB flash drive, and then double-click Setup.exe.

How to create a bootable Ubuntu USB Stick on Windows


To run Ubuntu from a USB stick, the first thing you need to do is insert a USB stick with at least 2GB of free space into your PC.
The easiest way to put Ubuntu onto your stick is to use the USB installer provided at pendrivelinux.com . You’ll need to download and install  and follow the instructions.
  1. 1
    Select Ubuntu Desktop Edition from the dropdown list.
  2. 2
    Click 'Browse' and open the downloaded ISO file.
  3. 3
    Choose the USB drive and click 'Create'.

Sunday, May 12, 2013

Password Protect Any Folder Without Any Software


  1. Open Notepad and Copy code given below into it.


cls
@ECHO OFF
title pcgeeky.blogspot.com
if EXIST "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}" goto UNLOCK
if NOT EXIST MyFolder goto MDMyFolder
:CONFIRM
echo Are you sure to lock this folder? (Y/N)
set/p "cho=>"
if %cho%==Y goto LOCK
if %cho%==y goto LOCK
if %cho%==n goto END
if %cho%==N goto END
echo Invalid choice.
goto CONFIRM
:LOCK
ren MyFolder "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"
attrib +h +s "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"
echo Folder locked
goto End
:UNLOCK
echo Enter password to Unlock Your Secure Folder
set/p "pass=>"
if NOT %pass%== pctricks goto FAIL
attrib -h -s "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"
ren "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}" MyFolder
echo Folder Unlocked successfully
goto End
:FAIL
echo Invalid password
goto end
:MDMyFolder
md MyFolder
echo MyFolder created successfully
goto End
:End

-------------------------------------------------------------------------------------------------------


   2. Save the notepad file as lock.bat (.bat is must)
   3. Now double click on lock.bat and a new folder will be created with name MyFolder
   4. Copy all your data you want to protect in that New folder
   5. Now double click on lock.bat and when command promp appears Type Y and press enter.
   6. Now MyFolder will be hidden from you view, to access that folde double click on lock.bat
   7. It will ask for password enter your password and done. (Default password is pctricks)

How To Hide File Behind Image ?


In order to do this you should have basic understanding of command line, but if you don't know check out  tutorial given below.

1. Select an image to be used for hiding file behind the image.
2. Now select a file to hide behind the image and make it in .RAR format. With the help of the WinRAR.
3. And most important is that paste both the files on desktop. You may do this anywhere instead of desktop if you have some basic understanding of command line.
4. Now open cmd by going to Start > Accessories > Command Prompt and type following commands in it.
cd desktop





5. CD stands for change directory by typing above command you change your directory to desktop. After that type command given below.

 Copy /b imagename.jpg + filename.rar finalimage.jpg



Replace imagename.jpg with the name of image you want your file to be hidden behind. Don't forget to add image format (Eg: .jpg,.png,.gif)
Replace filename with name of your file you want to hide. It must be in .rar format.
Finally Replace finalimage.jpg with whatever name you want your final image with hidden files should be. This is the image where your file will be hidden.
6. Now when you will try to open this newly created image it will open as normal image, but to open you hidden file you need follow steps given below.
How To Access Hidden File ?

To access your hidden file you need to open the newly created image in winrar. Just follow simple steps given below to do that.

    1. Open winrar
    2. Now locate your image and open it or simply drag your image in winrar.
    3. Extract the file and done.
Some Awesome Tricks

Making Nameless Folder In Windows
Watch Star Wars movie in CMD
Finding Ip Address Of A Website Using Command Prompt Or CMD

-----------------------------------------------------------------------------------------------------------

Turn Your Web Browser into a Text Editor !!


Just Copy this Code in your Browser and Press Enter ... ta da you are done !!
Now to save it just use the combination Ctrl+s and name.txt .

data:text/html, <html contenteditable>

-----------------------------------------------------------------------------------------------

Saturday, March 30, 2013


Making Your Computer an Online Server



Probably the easiest way to install Ubuntu Server on your computer. Here are a few steps to install Ubuntu Server on your computer. First, make sure the computer works, are you using it currently? does it have any issues, if you solve them now it'll rule out anything Ubuntu-related later.

Does the target PC operate on a 32-bit or 64-bit architecture? If it looks like the one pictured in the article chances are it will be the older 32-bit. Either way you'd want to make absolutely sure by either Googling the computer model or if its' currently operational and running windows by right clicking on my computer, going to properties, and read what it says about the system type. if it has (x86) or 32-bit, its a 32-bit machine, if it says 64-bit its 64-bit.

Download Ubuntu Server .iso from the official Linux homepage- http://www.ubuntu.com/download/server. Make sure to select the appropriate version (either 32-bit or 64-bit) .

The file size is 695MB. If you want to install Ubuntu via a live disc. All you have to do is find an appropriately sized CD-R or CD-RW disc (700 MB is fine) pop it into the tray, and burn the entire unextracted file to the disc. If your using windows 7 all you have to do, with the disc inserted into the bay, right click the file, select "Create live image" or something like that, follow the instructions (select a slower write speed to minimize errors) and you're done.

I prefer using the Live USB method because its easier and has a faster installation time. All you'll need is a nifty little program called Linux Live USB creator (download it here  http://www.linuxliveusb.com/en/download ) and an empty USB drive (reformat it if you have to) a 2GB drive is fine, but if you want to use a bigger one go ahead.
Start the Linux Live USB creator (LiLi for short.) At this point LiLi will ask you for the location of the ISO image you're trying to use, find it select it, go through all the steps, hit start or burn, wait for it to finish, and there you have a live USB stick ready to go.

To go ahead and install the system on the PC, you need to connect your target pc to the network it's going to be on, start up the computer, open the CD tray and pop the live disc in or stick in the USB and go to the boot first menu just as the monitor displays the BIOS screen. It should tell you which key to press for boot options during this brief display. If you miss it, just restart the computer again. Select either the usb drive or the disc drive to boot up from first. If everything is correct, the ubuntu start up logo will be shown followed by a menu consisting of several options. Install Ubuntu Server being the first. scroll to that selection and hit enter. ( At this point you should know everything is monitor and keyboard only, no mouse ) follow the keyboard setup steps, if you're in the united states, just hit do it manually and select United States, United States, if you're in some other country with different keyboard layout you can either select it manually or play a little game where you press the keys that the computer tells you too if you have them.

Go ahead and follow the instructions. At this point it'll ask you to create a username and password that can have root access, whether you want to use up the whole disk or just a partition ( if you have another OS installed ) (  I would recommend using the whole drive ) If you want to encrypt the hard drive (if you're planning to store sensitive information I would def. choose this option ) and it will ask for a host name for the server, which is basically like the domain name. ( if its a private network you can call it anything ). It will also ask you if you want to install specific server packages right away like a LAMP server, Samba, or Tomcat Java Server.At this point you should have an idea of what you want your server to do, but if you have no idea and this is your first test server or something, just go with LAMP. Bear in mind that you can install any of these later using the sudo apt-get install command. or the Aptitude UI.

Also you should really write down the passwords you chose for the first user and encryption passphrase if you chose to encrypt  because you will be f***ed later if you ever have to shutdown your server , because it'll ask you for the passphrase and the hard drive is practically locked until you enter it, and if you don't remember it, you're screwed, You can't ssh into it, or view web pages or anything. 

After all of this the actual installation will start , which make take a while, depending on whether you chose a USB or CD to install. I've never actually installed with the live CD but the USB one is around 10 minutes or less for me. If everything goes well, at which this point everything should, Ubuntu Server will be installed, the PC will restart, you'll have to enter your passphrase if you chose to encrypt. Then your user login and password, and then wallah, you have your server.

Ok, so you shouldn't have had to enter a single shell command to install ubuntu. Most if not all of the typing should have , It would be nice at this point to be able to access your computer remotely. For this you'll need the OpenSSH server. You can do this by typing in the command line :

sudo apt-get install openssh-server
types yes or y to confirm, and the SSH server should be installed.

Download the best (IMO) SSH client:
http://charlotte.at.northwestern.edu/bef/SSHdist.html#windows

How To login with SSH: 

click Quick Connect, on the pop-window, enter your server's IP address
enter your username :
make sure port number 22 is used.
hit connect.
if SSH connects to the server it'll then ask for your password.
if the password is correct SSH connects and you start at /home/username/
directory.


At this point it's up to you to decide what to do with your new server. If you want to serve web pages then I suggest reading up on apache and cgi scripting languages. if you want to create databases then look up the existing database servers. all in all, its your call now. consult your buddies, or just google through it all ..

If there are any Issues , Mail me @ aks2103@gmail.com


Friday, March 29, 2013



C Proxy - Manage Your Internet Sharing ...


Dear in order to make your computer a server, you must install a server application on your computer. One such application is C-PROXY, which you can download from any site. It converts the local machine into a server which in turn serves the request for other machines known as client machines.

1. Installing C-proxy

Download the setup file by searching on Google. Install it by double click, click on install button, click yes on the agreement box and final click on next to completely install it.

2. Configuring server machine

1. Open C-PROXY click on preference tab.
2. Select IP list tab and add the IP addresses of the computers to which you want to distribute internet which are known as clients.For example if your IP address is 198.100.0.1 and you want to distribute internet to computers with IP addresses 198.100.0.2, 198.100.0.3 and 198.100.0.4 so add 127.0.0.1, 192.168.0.1, 192.168.0.2,192.168.0.3, 192.168.0.4 in IP list item.
3. Click on apply and close C-PROXY. 

3. Configuring client machines.

No C-PROXY application is required for clients or computers you want to connect to your computer. But you need to configure your internet browser. I have listed all setting for various browsers.
Microsoft Internet explorer
1. Open tools – internet options.
2. Select connections page and select your internet connection. 
3. In proxy server put 127.0.0.1 with port number as 3128.
4. Click on advanced button and set the use same proxy setting for all protocols.
5. Click on OK. 

Mozilla Firefox
1. Open tools and then option tab.
2. Open advanced tab.
3. Click on network page.
4. Click on settings option and choose manual proxy option.
In HTTP proxy protocol write address: 127.0.0.1 
Port: 3128.
6. Check the use this proxy server for all protocols item.
7. Press OK button. 

Google Chrome: 
1. Open options tab. 
2. Select the under the hood page.
3. Click the change proxy settings button.
4. Make address as 127.0.0.1 and port as 3128.
5. Click on the OK button. 
6. Restart browser.

Sunday, February 17, 2013


To Enable The Administrator Account to log on as Administrator in Windows 7 and 8

  • Open the command prompt with elevated privileges. To do this click the Start Orb then All Programs, click on Accessories, then right-click on Command Prompt and then select Run as administrator.
  • In the Command Prompt, type net user administrator /active:yes and then press Enter.

    enable-administrator
  • Restart your computer or log off to see the Administrator account in the Windows 7 login screen. Now, just select Administrator to log in as Administrator.

WarningDo not use the Administrator account always for your normal tasks as it bypasses all security. Use a normal account instead.

Friday, January 18, 2013

How to restore, refresh, or reset your windows 8 PC


How to restore, refresh, or reset your PC (Win 8)


To restore your PC using System Restore

  1. Swipe in from the right edge of the screen, and then tap Search.
    (If you're using a mouse, point to the upper-right corner of the screen, move the mouse pointer down, and then clickSearch.)
     Enter Recovery in the search box, tap or click Settings, and then tap or click Recovery.
  2. Tap or click Open System Restore, and follow the prompts.

Refresh your PC without affecting your files

If your PC isn't performing as well as it once did, and you don't know why, you can refresh your PC without deleting any of your personal files or changing your settings.

Note

  • You might be prompted to insert discs or recovery media that came with your PC. Check the info that came with your PC to see if your PC manufacturer provided these discs or media. In some cases, you might have created them when you first set up your PC.
Warning

Warning

  • The apps that came with your PC or you installed from Windows Store will be reinstalled, but any apps you installed from other websites and DVDs will be removed. Windows puts a list of the removed apps on your desktop after refreshing your PC.

To refresh your PC

  1. Swipe in from the right edge of the screen, tap Settings, and then tap Change PC settings.
    (If you're using a mouse, point to the upper-right corner of the screen, move the mouse pointer down, click Settings, and then click Change PC settings.)
  2. Under PC settings, tap or click General.
  3. Under Refresh your PC without affecting your files, tap or click Get started.
  4. Follow the instructions on the screen.

Remove everything and reinstall Windows

If you want to recycle your PC, give it away, or start over with it, you can reset it completely.

Note

  • You might be prompted to insert discs or recovery media that came with your PC. Check the info that came with your PC to see if your PC manufacturer provided these discs or media. In some cases, you might have created them when you first set up your PC.
Warning

Warning

  • All of your personal files will be deleted and your settings will be reset. Any apps the came with your PC will be reinstalled, but all other apps will be removed.

To reset your PC

  1. Swipe in from the right edge of the screen, tap Settings, and then tap Change PC settings.
    (If you're using a mouse, point to the upper-right corner of the screen, move the mouse pointer down, click Settings, and then click Change PC settings.)
  2. Under PC settings, tap or click General.
  3. Under Remove everything and reinstall Windows, tap or click Get started.
  4. Follow the instructions on the screen.

    Note

    • You'll be prompted to choose whether you want to erase data quickly or thoroughly. If you choose to erase data quickly, some data might be recoverable using special software. If you choose to erase data thoroughly, this will take longer but it makes recovering data far less likely.